|
Product Details:
|
| Material: | AMS 5788, UNS R30006, UNS R30106, UNS W73006, UNS W73036, UNS 5387, AWS A5.13, AWS A5.21 | ||
|---|---|---|---|
| High Light: | heat resistant alloys,high end special alloys,UNS 5387 Stellite 6 Bar |
||
AMS 5788, UNS 5387 STELLITE 6 bar, pipe, wire, block, ring for aerospace, chemical industry, auto etc.
1 PRODUCT
AMS 5788, UNS R30006, UNS 5387, STELLITETM 6 bar, pipe, wire, block, ring for aerospace, chemical industry, auto, petro-chemical industries, denta, steam engine, extruding die etc.
2 EQUIVALENT DESIGNATION
AMS 5788, UNS R30006, UNS R30106, UNS W73006, UNS W73036, UNS 5387, AWS A5.13, AWS A5.21
3 APPLICATION
Mechanical components for chemical industry, auto, aerospace, petro-chemical industries, denta, steam engine, extruding die for copper or aluminum producttion, hammer die, engine impeller, turbocharger turbine / impeller, bearing sleeve, oil sampler, galvanic protection tube, piston, valve cage, press cover, serrated tooth tip, semiconductor component, washer, gasket, special tool nose, friction wafer, protection tube for liquid steel temperature measuring, valve seat ring, centrifugal head for glass cotton, pump component, valve ball etc.
4 CHEMICAL COMPOSITION (wt%):
| Material | Co | Ni | Si | Fe | Mn | Cr | Mo | W | C | P | S |
| Stellite™ 6 | Balance | ≤3.0 | 0.2-2.0 | ≤3.0 | 0.5-2.0 | 27.0-32.0 | ≤1.5 | 4.0-6.0 | 0.9-1.2 | ≤0.040 | ≤0.030 |
5 PHYSICAL CONSTANTS
| Hardness | Density | Melting Range |
|
36 - 46 HRC 380 - 490 HV |
8.44 g/cm3 0.305 lb/in3 |
1285 – 1410°C 2340-2570 °F |
6 MECHANICAL PROPERTY
Nominal tensile properties at room temperature
| Product | Ultimate Tensile Strength Rm | Yield Stress Rp(0.2%) | Elongation | Elastic Modulus | |||
| ksi | MPa | ksi | MPa | A(%) | psi | GPa | |
| Castings | 123 | 850 | 101.5 | 700 | <1 | 30.3x106 | 209 |
| Stellite® HS-6 (*) | 183.5 | 1265 | 109 | 750 | 3-5 | 34x106 | 237 |
(*) “HS” = HIP-consolidated. Ref: Ashworth et al. Powder Metal. 1999 42[3] p.243-249 and internal tests.
7 CORROSION RESISTANCE
The typical electrode potential in sea water at room temperature is -0.25V (SCE). Like stainless steels, StelliteTM 6 corrodes primarily by a pitting mechanism and not by general mass loss in seawater and chloride solutions. Its mass loss in sea water is below 0.05mm per year at 22˚C.
8 NOMINAL HOT HARDNESS (HV resp. DPH) AS CAST
| 20°C (68°F) | 100°C (212°F) | 200°C (392°F) | 300°C (572°F) | 400°C (752°F) | 500°C (932°F) | 600°C (1112°F) | 700°C (1292°F) | 800°C (1472°F) | 900°C (1652°F) |
| 410 | 390 | 356 | 345 | 334 | 301 | 235 | 155 | 138 | 95 |
9 PRODUCT FORM
| Components | ||||
| Castings | Cladded / Hardfaced | PM / HIP parts* | ALM parts* | Wrought** |
* On special request.
** A separate brochure is available for the wrought forms of this alloy, namely StelliteTM 6B and StelliteTM 6K.
Consumables for Cladding / Hardfacing and Additive Layer Manufacturing (ALM)
| Rods | TIG-Welding | Oxy-Acetylene Welding | ||||
| Electrode | MMA Welding | |||||
| Cored Wire | MIG Welding | Submerged Arc Welding | ||||
| Powder | PTA | Laser | HVOF | Powder | Spray&Fuse | ALM |
| Cladding | Cladding | Spraying | Welding | |||
10 TYPICAL STRUCTURE
Casted StelliteTM 6 Alloy (Resin Shell Casting)
Welded StelliteTM 6 Alloy (Plasma Powder Cladding)
Scanning electron micrograph of cast stellite 6 at 1000x magnification.
11 STANDARD SPECIFICATIONS
Stellite® 6 is available as welding wire, rod, powder, and electrodes; finished castings and P/M parts. A separate brochure is available for the wrought forms of this alloy, namely Stellite® 6B and Stellite® 6K. Stellite® 6 can be supplied to the following specifications:
| Product | Rod, Casting | P/M Part | Electrode | Wire | Casting | Rod, Wire | Rod | Wire | Electrode |
| Specification | UNS R30006 | UNS R30106 | UNS W73006 | UNS W73036 | UNS 5387 | AMS 5788 | AWS A5.21 / ASME BPVC IIC SFA 5.21 ERCoCr-A | AWS A5.21 / ASME BPVC IIC SFA 5.21 ERCCoCr-A | AWS A5.13 / ASME BPVC IIC SFA 5.13 ECoCr-A |
12 COMPETITIVE ADVANTAGE
(1) More than 50 years experience of research and develop in high temperature alloy, corrosion resistance alloy, precision alloy, refractory alloy, rare metal and precious metal material and products.
(2) 6 state key laboratories and calibration center.
(3) Patent technologies.
(4) High performance.
13 BUSINESS TERM
| Minimum order quantity | Negotiable |
| Price | Negotiable |
| Packaging details | Water prevent, seaworthy transport, non-fumigation wooden box |
| Mark | As per order |
| Delivery time | 60-90 days |
| Payment terms | T/T, L/C at sight, D/P |
| Supply ability | 100 metric tons / Month |
Contact Person: Mr. lian
Tel: 86-13913685671
Fax: 86-510-86181887
